Xtrainer Front Forks
-
ScruffyDroid
- 350cc Veteran
- Posts: 182
- Joined: Tue Dec 06, 2016 7:36 am
- Location: Camberley, Surrey, UK
Re: Xtrainer Front Forks
The internals I am getting fitted are the Beta derived Ohlins replacements, as per your post above ^.
Beta Xtrainer 300 
Honda CRF230F
ex-Kawasaki KDX220R (now sold to a fellow TRF Member)
Honda CRF230F
ex-Kawasaki KDX220R (now sold to a fellow TRF Member)
-
Jezben
- 250cc Trail Rider
- Posts: 31
- Joined: Tue Dec 04, 2018 12:44 pm
Re: Xtrainer Front Forks
Is it just the forks your upgrading Barry? Or are you doing the shock too.
I'd like to re-valve my shock, think that would improve the handling.
I'd like to re-valve my shock, think that would improve the handling.
-
ScruffyDroid
- 350cc Veteran
- Posts: 182
- Joined: Tue Dec 06, 2016 7:36 am
- Location: Camberley, Surrey, UK
Re: Xtrainer Front Forks
Just the forks. The shock will have to wait at the moment - I have a Fox Podium RC2, but the one I got, doesn't have the clevis pin fitting on the lower. When I find some time, I will buy the lower and fit it.
Beta Xtrainer 300
Honda CRF230F
ex-Kawasaki KDX220R (now sold to a fellow TRF Member)
Honda CRF230F
ex-Kawasaki KDX220R (now sold to a fellow TRF Member)
-
ScruffyDroid
- 350cc Veteran
- Posts: 182
- Joined: Tue Dec 06, 2016 7:36 am
- Location: Camberley, Surrey, UK
Re: Xtrainer Front Forks
I had my forks done this morning by Jack @ John Lee Motorcycles in Higham Ferrers. Took him about an hour to fit. Manufactured by Andreani (invoiced as Ohlins) and are different to the previous Andreani iteration - apparently to an Ohlins design? They are a complete open chamber replacement for the current internals. Compression and rebound on both forks, with air bleed screws.
I'll fit them tomorrow, test run and give you my opinion.
I'll fit them tomorrow, test run and give you my opinion.
Beta Xtrainer 300
Honda CRF230F
ex-Kawasaki KDX220R (now sold to a fellow TRF Member)
Honda CRF230F
ex-Kawasaki KDX220R (now sold to a fellow TRF Member)