I'm stumped
My husaberg te300 rides perfectly until I get to the top of the rev range.
Then it starts to splutter and runs like a bag of spanners.
The carb is spotless and I don't think its a fuel problem.
Anyone got any ideas.
Berg problem
-
Stewie
- 1150 adventurer
- Posts: 1172
- Joined: Wed Dec 05, 2012 11:12 pm
Re: Berg problem
If the carbs clean and the needles and jets are not worn, then I would be looking at air starvation at the top of the rev range, air filter clean?, leak/split?
Off the beaten track!.
-
mudeevee
- 750 flat tracker
- Posts: 935
- Joined: Mon Dec 03, 2012 12:18 pm
- Location: Guildford
Re: Berg problem
If not air intake or fuel issue, could be electrical (plug/plug cap/coil) or even a badly clogged exhaust end can.....
-
willie
- 250cc Trail Rider
- Posts: 83
- Joined: Wed Dec 16, 2015 8:46 pm
Re: Berg problem
Thank you both for your help. I have put in a slightly bigger main jet and this appears to have worked. I will know for sure this Sunday. I'm off to the desert rose.
Thanks again.
Thanks again.