Rear Sprocket
-
- 250cc Trail Rider
- Posts: 49
- Joined: Mon Dec 03, 2012 8:10 pm
Rear Sprocket
Always use loc tight or similar glue on the end of the studs on your back sprocket because if you don't they will get loose and shear off bits of you wheel hub which can be a pain in the bum when you are a few mile off road.
-
- 250cc
- Posts: 1089
- Joined: Sun Dec 02, 2012 11:17 pm
-
- woz bus pass
- Posts: 1766
- Joined: Tue Dec 04, 2012 7:49 pm
Re: Rear Sprocket
I tend to Loctite pretty much everything, a tube or bottle of Loctite costs a couple of quid. Seen to many people lose bolts, gearlevers, kickstarts etc whilst out riding to make it standard practice for me.
-
- 1150 adventurer
- Posts: 1172
- Joined: Wed Dec 05, 2012 11:12 pm
Re: Rear Sprocket
Always good advice, and don't forget to clean you hub flange, otherwise even with Loctite you'll still have a wobbly sprocket.
Off the beaten track!.
-
- 250cc
- Posts: 1089
- Joined: Sun Dec 02, 2012 11:17 pm
Re: Rear Sprocket
I've found a light application of rust keeps things in place.
--Dave
www:https://www.david.uk
www:https://www.david.uk
-
- 1150 adventurer
- Posts: 1172
- Joined: Wed Dec 05, 2012 11:12 pm
Re: Rear Sprocket
gtcodave wrote:I've found a light application of rust keeps things in place.
That's all well and good, but what about the bike.....


Off the beaten track!.
-
- 750 flat tracker
- Posts: 935
- Joined: Mon Dec 03, 2012 12:18 pm
- Location: Guildford
Re: Rear Sprocket
Stewie wrote:Always good advice, and don't forget to clean you hub flange, otherwise even with Loctite you'll still have a wobbly sprocket.
Just spotted Stewie's advice on bike maint. Just wondering if this is a different Stewie?
The one I know can't get the back wheel off (actually 4 of of us could not). Did the AA man sort it

-
- 1150 adventurer
- Posts: 1172
- Joined: Wed Dec 05, 2012 11:12 pm
Re: Rear Sprocket
Just goes to show, that not only did I not have a wobbly sprocket, I also had a secure rear wheel....
The AA man didn't even try just drove me home, where the correct application of pressure solved the problem....


The AA man didn't even try just drove me home, where the correct application of pressure solved the problem....


Off the beaten track!.
-
- 250cc Trail Rider
- Posts: 59
- Joined: Mon Dec 03, 2012 4:25 pm
Re: Rear Sprocket
Perhaps a silly question, but if you put Loctite on a screw... is it possible to remove (unscrew) the screw later? I am afraid of loosing any bolts, but more afraid of having one that cannot be removed!
-
- 250cc
- Posts: 1089
- Joined: Sun Dec 02, 2012 11:17 pm
Re: Rear Sprocket
Locktite blue. I put it on everything. Stops it from vibrating loose and undoes no worries. Just make sure you replace nuts and bolts that are showing signs of rounding.
--Dave
www:https://www.david.uk
www:https://www.david.uk
-
- 350cc Veteran
- Posts: 197
- Joined: Fri Dec 07, 2012 8:34 pm
Re: Rear Sprocket
Gonzalo wrote:Perhaps a silly question, but if you put Loctite on a screw... is it possible to remove (unscrew) the screw later? I am afraid of loosing any bolts, but more afraid of having one that cannot be removed!
Loctite doesn't mean super glue, there is a tube of thread lock called Loctite easily bought at Halfords. It is quite expensive at around £6 so anyone know where it may be cheaper please do let me know
Rich
-
- You should've bought a KTM!
- Posts: 427
- Joined: Mon Dec 03, 2012 8:24 am
- Location: Surrey
Re: Rear Sprocket
Don't use the green one!!!!
Blue will hold any bolt, and crack loose without much fuss when Spannering.
G
Blue will hold any bolt, and crack loose without much fuss when Spannering.

G

Grant
KTM 250EXC SixDays