sidestand shortening
-
SLR
- 120cc Thumpstar Pro
- Posts: 26
- Joined: Thu Jun 20, 2013 6:08 pm
- Location: Woking
sidestand shortening
Does anyone know of somewhere in the Woking area i can get my side stand shortened? Since lowering the bike it is almost vertical on the stand.
-
gavinskii
- 400cc Thumper
- Posts: 320
- Joined: Mon Dec 03, 2012 5:54 pm
Re: sidestand shortening
Hopefully Derek (Chopper) or Kev will chime in, but we have used an engineering workshop in Ashtead for similar things. Afraid I can't recall details.
-
Dave
- 250cc
- Posts: 1089
- Joined: Sun Dec 02, 2012 11:17 pm
Re: sidestand shortening
If it's a KTM just keep using it. They seem to shorten themselves on occasion.
--Dave
www:https://www.david.uk
www:https://www.david.uk
-
big yellow tractor
- 400cc Thumper
- Posts: 297
- Joined: Mon Dec 03, 2012 8:54 pm
- Location: Aldershit, "Gateway to the west"
Re: sidestand shortening
Steel or alloy ?
If It's steel, I should be able to sort it for you.
I'm in Aldershot
If It's steel, I should be able to sort it for you.
I'm in Aldershot
-
GDAS
- LIFE member
- Posts: 178
- Joined: Sun Dec 09, 2012 10:38 pm
- Location: Woking
Re: sidestand shortening
I'm in Woking and I've used Paul Bateman Welding in Ripley a couple of times, 01483 223812 or 07702 353473
Graham
Graham
-
Raleigh Chopper
- 400cc Thumper
- Posts: 264
- Joined: Mon Dec 03, 2012 7:56 pm
Re: sidestand shortening
gavinskii wrote:Hopefully Derek (Chopper) or Kev will chime in, but we have used an engineering workshop in Ashtead for similar things. Afraid I can't recall details.
engineering firm in Ashtead is Cranford Engineering.
The owner is Paul. He is a real talented guy and seems to be able to repair anything.
http://www.cranford-engineering.co.uk/