Husaberg FE400

Talk about anything.
Ewormaharg
250cc Trail Rider
Posts: 55
Joined: Mon Jun 02, 2014 2:19 pm
Location: Lightwater, Surrey

Husaberg FE400

Postby Ewormaharg » Mon Aug 04, 2014 1:48 pm

Has anyone had any experience with 2002 or 2003 Husa FE400's? I've seen a couple advertised at via a dealer at £2,100.

I'm reading varying reports on their reliability...or lack of it. The 2002 doesn't appear too good. Also, is it suitable for a relative newbie? I'm currently riding an XR400.

Cheers


Graham

User avatar
Dave
250cc
Posts: 1089
Joined: Sun Dec 02, 2012 11:17 pm

Re: Husaberg FE400

Postby Dave » Mon Aug 04, 2014 2:13 pm

My indirect experience is that they are not as reliable as the Japanese machines.
If you intend on plodding along 400's are OK. But, and although they are much, much better these days, the weight can be a pain when you want to have 'fun'.

Ewormaharg
250cc Trail Rider
Posts: 55
Joined: Mon Jun 02, 2014 2:19 pm
Location: Lightwater, Surrey

Re: Husaberg FE400

Postby Ewormaharg » Mon Aug 04, 2014 4:54 pm

An alternative may have been found......a 36mm Mikuni Pumper carb from XR's only. This and learning to fall off less should reduce the number of times I need to kick the b'stard over to get it started. :)

User avatar
Beerbelly
750 flat tracker
Posts: 888
Joined: Mon Dec 03, 2012 9:16 am

Husaberg FE400

Postby Beerbelly » Mon Aug 04, 2014 5:55 pm

+1 for a pumper carb on an xr400 makes a big difference.
Image

Ewormaharg
250cc Trail Rider
Posts: 55
Joined: Mon Jun 02, 2014 2:19 pm
Location: Lightwater, Surrey

Re: Husaberg FE400

Postby Ewormaharg » Wed Aug 20, 2014 6:32 pm

Pumper Carb purchased. Hopefully I'll have it in my hot and sweaties around 9th September.


Return to “General Discussion”